More Info About Car DVD Players

DIN is a standard installation space of which vehicle center console reserved for car electrical appliances such as Car DVD, Car monitors and so on. 1 DIN means a standard space which width and high are fixed but depth is limitless, 2 DIN is twice space as 1 DIN, this space is generally used for the installed of the sound equipment console, tuner or LCD monitors.

"DIN" is the word initials of the "German industry standards", actually, car audio standard DIN is from the German industry standard. Here, DIN is a fixed three-dimensional as wide 178 mm × high 50 mm × depth 153 mm, converted to the common imperial units of Europe and USA industrial, it's 7-inch width× 2-inches high×6 inches depth.

DIN is the criterion of the inside size which for the car audio console and corresponding installation space. Because of the very limited space inside the car, the car stereo are not the same as appliance stereo system which manufacturer can design the figuration size arbitrarily. And cars are manufactured by manufacturing factory, car stereo is manufactured by electronic equipment manufacturers, in the absence of a uniform standard, it will caused a embarrassing situation that car stereo can not be put into the cars. A standard car stereo console products, 178mm in width can not be changed, and the height can be 50mm or 100mm. Usually, 50mm in the 1 DIN, 100mm is the 2 DIN. If you need to replace the host when you converted the car stereo, you should base on the size of the installation space to select the host . Obviously 1 DIN space is not suitable for 2 DIN car dvd, and 2 DIN space can be installed in one 2 DIN Car DVD or two 1 DIN car dvd. If only install with a 1 DIN machine on the 2 DIN space, then the remaining space can be covered used by the panel which along with the car.